Is the way to be! But unfortunately if you’re trying to run a set of LED headlight bulbs on a circuit that runs off pulsed voltage, then you’re out of luck. Out of luck unless you’ve got a set of the 2Stroke Anti-Flicker harnesses that is!
With some massive 10K mF Capacitors inside to help absorb the pulsing current coming from the factory wiring, then release it in a smooth fashion out into the LED bulb drivers, they’re quite simple and effective.
No need for complicated wiring to solve this common issue. The 2Stroke Anti-Flickers are easy to setup. With a standard 9006 Male Input and a standard 9006 female output – in most cases you can just “plug n play” in between the factory wiring and the Drivers on your bulbs.
Often run off both pulsed voltage, and low voltage. It’s important to understand which one your car uses – because if you’re having issues with a low voltage setup, these will not solve that problem (since they don’t increase the voltage coming from the car…they just smooth it out).
Can’t fault that! These things are really nice looking. With a matte black extruded aluminum shell surrounding the goods inside, they’re well protected and weather resistant too. High quality titanium-colored techflex mesh insulation provides extra abrasion resistance for the input and output wiring too.
We have been doing this for more than a decade. If you are still unsure of what to do, where to go, or just plain have questions, don’t be shy. We are always here to help you in every way that we can and will continue to keep helping out until you fully understand the entire process from start to finish. Remember, we are people too, and everyone starts off the same way with knowing nothing so we completely understand if this is overwhelming for you as we were in the same boat. So contact us and we will get you started towards the right path.