Free ground shipping to all US addresses on shop orders over $100!

Email us! retrofit@hidillusionz.com

Call to us: 212-300-5906

Double Standard:

In the HID Headlight Retrofit world there are two standards for high beam outputs. “Molex” two pin connectors and 9006.

9006 Female & Molex Male:

These will allow you to use another vendors bi-xenon harness with our bi-xenon projectors.

9006 Male & Molex Female:

These will allow you to use our bi-xenon harness with another vendors hi/lo bulbs or bi-xenon projectors

NOTE:

Please note that Male and Female refer to the metal pins inside the plastic housings, not the connector housings themselves.

For best results:

TRS spec’s only 9006 Male and Female sockets for our high beam inputs and outputs on our harnesses. Don’t make the mistake of thinking your solenoid is dead just because of a poor connection – try our full kit!

Assurance:

We have been doing this for more than a decade. If you are still unsure of what to do, where to go, or just plain have questions, don’t be shy. We are always here to help you in every way that we can and will continue to keep helping out until you fully understand the entire process from start to finish. Remember, we are people too, and everyone starts off the same way with knowing nothing so we completely understand if this is overwhelming for you as we were in the same boat. So contact us and we will get you started towards the right path.

Reviews

There are no reviews yet.

Be the first to review “Molex / 9006 Adapters”

Related Products

With the years of experience we have gained, you can find examples of our work and positive testimonials from many different car enthusiast forums. Still need more? Check out our gallery and see the many different years, makes, and models we have worked on and still growing!