Koito Bi-Xenon Solenoid Pigtails

Lost/Missing?

Got some Koito Bi-Xenon projectors for a steal on eBay, but missing the solenoid inputs? These OEM-Replica pigtails are a life saver!

Direct Replacement:

These are a direct fitment for the 2 pin solenoids on the back of many popular Koito projectors such as the RX350 Bixenons, G37 Sedans, and Murano Bi-xenons

Morimoto:

Just so happens to have used the same standard for their solenoid on the Mini D2S 3.0 Bi-xenon projectors, so these will also work on those projectors too.

Length:

Pre-wired with approximately 10″ of stranded 16ga white & black wire with 9006 male pins on the end.

Assurance:

We have been doing this for more than a decade. If you are still unsure of what to do, where to go, or just plain have questions, don’t be shy. We are always here to help you in every way that we can and will continue to keep helping out until you fully understand the entire process from start to finish. Remember, we are people too, and everyone starts off the same way with knowing nothing so we completely understand if this is overwhelming for you as we were in the same boat. So contact us and we will get you started towards the right path.