Yeah the FX-R Stage III kit has been around for a long time now, but it’s stuck around for a reason. Based on the wise old lumberjack of the Morimoto projector family, the FX-R is the original bi-xenon built for big boys. No threaded shaft for easy retrofitting, nothing tiny about it. This is the kit for the guys who want the best and aren’t afraid to get their hands dirty with a dremel.
The FX-R 3.0 is the most refined version of Morimoto’s very first bi-xenon projector, and it shows in their picture perfect light output. They use Morimoto’s Kuria optic clear lenses to give them a wide, intense beam pattern with a sharp and colorful cutoff line. The 3.0 version is optimized with a multi-faceted reflector bowl, curved cutoff shield, and the biggest, most reliable bi-xenon solenoid on the business. The FX-R is the biggest Morimoto projector and in some applications may take a little more effort to install, but man are they worth it! As the biggest Morimoto distributor in North America, all projectors are tuned to perfection here in our shop. .
Basically, they’re the trim piece that adds the finishing touch to your new headlight retrofit. They cover the projector after it’s installed to restore the factory-finished look inside the housings. With so many different shapes, sizes, and designs available; we really recommend picking one that suits the geometry inside of your headlights, and also your personal preference on how they look. Check out all of the projector shroud options we offer, and take your pick!
Morimoto’s XB ballasts are a functional work of art. While the industrial-edge design by California native Artur Saakyan looks great from the outside, they’re packed with too much modern tech on the inside to cover it all in on place. Their DSP 3.0 circuit maximizes reliability, input and output efficiency. Their ability to warm the bulbs up to full operating intensity quickly is matched by few. Hardly are all aftermarket-HID ballasts the same, and the XB’s make that clear in most every category in our opinion.
Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlight…and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you’re not seeing things here, but yes you will be seeing everything at night.
As one of the most important parts in any HID lighting upgrade; don’t skimp out when it comes to your wiring. It doesn’t matter how good your ballasts are. How good your bulbs are. If your harness is a piece of crap, when it gives out your headlights are gonzo. Morimoto’s harnesses are the best on the market and easily worth their premium price compared to cheaper alternatives. No matter which one is right for your application, the harness features triple-sealed central relay packs, 14ga stranded copper wiring, over-molded fittings, and plug-n-play functionality. This will ensure everything properly (and permanently) works with your vehicle’s original in-cabin controls.
Instead of a traditional relayed harness that draws power from the battery, Morimoto’s Standalone Canbus harnesses use two individual sub-harnesses to keep a load on the factory wiring. Recommended for vehicles that recognize when a bulb is out, these contain a series of capacitors and resistors to trick the car into thinking nothing has changed and help you avoid annoying “bulb out” warnings. We generally recommend them for use on most modern European applications instead of normal harnesses since they do a great job at providing stable power to the ballasts and canceling bulb out warnings.
Though LED halos may not be for everybody, if you’re looking for the cleanest, most simple, most reliable setup, we highly recommend the Morimoto XSB Halos. Not only are they the brightest, most uniformly lit halos currently on the market, but they double as a switchback turn signal with your blinker circuit. The integrated controllers are extremely easy to setup with only three wires (white, amber, and ground) and allow you to run the white mode continuously until interrupted by the signal – at which point they will blink amber. Once the signal stops, the XSB ring will automatically switch back to its pure white mode.
Protection is priceless! When you’re putting together a set of high-end headlights, the last thing you want is moisture in ’em the first time it rains outside. RetroRubber is the most effective way to make sure the original seal is fully restored. For the small price, why anybody wouldn’t prevent their new headlights from fogging up is beyond us. It’ll be the best twelve bucks you’ve ever spent.
We have been doing this for more than a decade. If you are still unsure of what to do, where to go, or just plain have questions, don’t be shy. We are always here to help you in every way that we can and will continue to keep helping out until you fully understand the entire process from start to finish. Remember, we are people too, and everyone starts off the same way with knowing nothing so we completely understand if this is overwhelming for you as we were in the same boat. So contact us and we will get you started towards the right path.