These will save you some money and allow the use of D2S bulbs with your aftermarket HID ballasts. Works with 99% of aftermarket HID kit ballasts that have “AMP” outputs. Please confirm compatibility by checking the product pictures if unsure.
These are built to industry standard specifications for AMP male/female high-voltage outputs, and “D2S” bulbs. They should work with all OEM and aftermarket ballasts and bulbs.
Another benefit of using these that many don’t realize is that they instantly add length to the output on your ballast – giving you a bit more freedom to choose where things are mounted. We’ll take it!
These are properly insulated from top to bottom to shield the high-voltage that HID ballasts produced. Thick rubber insulation prevents wires from getting nicked, and voltage from leaking out. Don’t want any of that business around here!
There are a lot of these read-headed AMP>D2S adapters on the market, you can find something seemingly the same on eBay or Amazon for probably a couple bucks less (we know, because we used to carry the cheaper ones too) – but take it from us, its not worth it. They may cause bulb ignition reliability problems, or even worse, fry the base of your bulbs from poor tolerances. Though still inexpensive, our adapters are top quality!
We have been doing this for more than a decade. If you are still unsure of what to do, where to go, or just plain have questions, don’t be shy. We are always here to help you in every way that we can and will continue to keep helping out until you fully understand the entire process from start to finish. Remember, we are people too, and everyone starts off the same way with knowing nothing so we completely understand if this is overwhelming for you as we were in the same boat. So contact us and we will get you started towards the right path.